KEMET - Aluminum Electrolytic Capacitors
KEMET's complete line of aluminum electrolytic capacitors are designed for use in all types of electronic equipment including power and alternative energy, industrial, telecommunications, automotive, military, medical and consumer electronics applications.
Kategorien
Screw Terminals | Snap-In | Axial Leads & Radial Crown | Surface Mount & Radial | Motor Start
Screw Terminals
KEMET's Screw Terminal Aluminum Electrolytic Capacitors offer very long life in applications requiring high ripple currents, with rated temperatures up to 125°C and voltages as high as 550 VDC. In addition to those products shown in the datasheets, KEMET can optimize the construction to offer application-specific balance between required life, temperature, ripple current, physical size, and cost.
Snap-In
KEMET's Snap-In Aluminum Electrolytic Capacitors are available with a wide variety of life and performance options including series with very long life and high ripple current for demanding alternative energy and industrial applications. They are offered with rated voltages up to 550 VDC and temperatures to 125ºC. In addition to those products shown in the datasheets, KEMET can optimize the construction to offer application-specific balance between required life, temperature, ripple current, physical size, and cost.
Snap-In Terminations
Series | Capacitance | Tolerance | Voltage | Temperature (°C) | Life (Max. Dia.) | Description | |
ALC10 | 56 µF to 82,000 µF | ±20% | 35 VDC to 550 VDC | -40 to +85 | 18 Khrs | The ALC10 series of snap-in capacitors cover a wide range of case sizes and voltage ratings featuring high ripple currents and long life performance. They are ideally suited for industrial and commercial applications demanding high reliability and long life expectancy such as frequency converters, UPS systems and switch mode power supplies. |
![]() |
ALC10S (Audio) | 10,000 µF | 50 VDC to 100 VDC | 18 Khrs | In collaboration with an audio research company, DNM Design, the Slit Foil Capacitor has been produced specifically for audio applications. This is a patented design which eliminates circulating currents in the aluminium foils. This spurious current flow on the capacitor plates is known to occur, but is not apparent in most applications. |
![]() |
||
ALC40 | 47 µF to 120,000 µF | 25 VDC to 500 VDC | -40 to +105 | 14 Khrs | The ALC40 series of snap-in capacitors feature the same high ripple currents and long life characteristics as the ALC10 series but can operate at higher temperatures. They are similarly suited for high reliability and long life applications such as frequency converters, UPS systems and switch mode power supplies, but the extended temperature range allows increased ripple current at lower temperatures. |
![]() |
|
PEH506 | 68 µF to 27,000 µF | ±20% | 35 VDC to 450 VDC | -40 to +85 | 6 Khrs | A long life electrolytic capacitor designed to offer high ripple current capability and low mounting cost. |
![]() |
PEH526 | 820 µF to 6,800 µF | 25 VDC to 80 VDC | -40 to +125 | 4 Khrs | A high performance snap-in electrolytic capacitor designed for automotive applications, with high vibration and high ambient temperature. |
![]() |
|
PEH532 | 68 µF to 27,000 µF | 35 VDC to 450 VDC | -40 to +105 | 2 Khrs | A long life electrolytic capacitor designed to offer high ripple current capability and low mounting cost. | ||
PEH534 | 150 µF to 22,000 µF | 4 Khrs | |||||
PEH536 | 47 µF to 18,000 µF | 6 Khrs | |||||
ELH | 47 µF to 120,000 µF | 6.3 VDC to 500 VDC | -40 (-25) to +85 | 2 Khrs |
A general purpose snap-in capacitor. Ordering Codes, Box Quantity, Other Commercial & Technical Information |
||
ELG | 47 µF to 82,000 µF | -40 (-25) to +105 | |||||
ELD | 47 µF to 68,000 µF | 10 VDC to 500 VDC | 3 Khrs |
Solder Pin or Tab Terminations
Series | Capacitance | Tolerance | Voltage | Temperature (°C) | Life (Max. Dia.) | Description | |
ALP/T20-T21 | 22µF to 150,000 µF |
-10% +30%,
±20% |
40 VDC to 450 VDC | -40 to +85 | 26 Khrs | ALC snap-ins (above) are the recommended replacement. | |
ALP/T22-T23 | ±20% | ALC snap-ins (above) are the recommended replacement. | |||||
ALN20S (Audio) | 10,000 µF |
-10% +30% (50V)
±20% |
50 VDC and 100 VDC | 18 Khrs | The T- Network capacitor is a unique capacitor designed specifically for Audio applications. Its main advantage lies in its ability to reduce the effect of unwanted resistance and inductance placing the signal closer to the pure capacitance of the component. |
Axial Leads & Radial Crown
KEMET's Axial Lead and Radial Crown Aluminum Electrolytic Capacitors are designed specifically for demanding applications requiring very long life, high vibration resistance and high ripple current. Operating temperatures up to 150°C are available without voltage derating. Example applications include automotive power, industrial LED lighting, and telecom infrastructure. In addition to those products shown in the datasheets, KEMET can optimize the construction to offer application-specific balance between required life, temperature, ripple current, physical size, and cost.
Series | Capacitance | Tolerance | Voltage | Temperature | Case Sizes | Description | |
PEG124 | 1 µF to 4,700 µF | -10% to +30% | 10 VDC to 450 VDC |
-40ºC to +105ºC -40ºC to +125ºC |
10 x 20 mm to 20 x 46 mm |
Very long life - 27.5 KH at 105ºC - and outstanding electrical performance. | |
PEG126 | 250 µF to 4,000 µF | 25 VDC to 63 VDC |
-40ºC to +150ºC
|
16 x 29 mm to 20 x 46 mm |
Vibration resistant, high ripple current, 1,500-2,000 H life at 150ºC, no voltage derating. | ||
PEG127 | 33 µF to 1,300 µF |
10 x 20 mm to 13 x 37 mm |
|||||
PEG130 | 900 µF to 6,300 µF |
20 x 29 mm to 20 x4 6 mm |
Very long operational life - up to 160,000 H at 80ºC, minimal heat generation | ||||
PEG220 | 250 µF to 4,700 µF |
-10% to +30%
-20% to +20% |
16 x 27 mm to 20 x 43 mm |
Vibration resistant, very high ripple current, 2,000 H life at 150ºC, no voltage derating. | |||
PEG226 | Vibration resistant, extremely high ripple current, 2,000 H life at 150ºC, no voltage derating. | ||||||
PEG225 | 470 µF to 6,300 µF |
-40ºC to +125ºC (at UR) -40ºC to +150ºC |
Vibration resistant, extremely high ripple current, 2,000 H life at 150ºC, Hi CV, voltage derating above 125ºC. | ||||
PEH126 PEH220 PEH225 PEH226 |
16 x 27.5 mm to 20 x 48 mm |
Radial crown allows these capacitors with a diameter of 16 mm and 20 mm to be mounted standing up. |
Surface Mount & Radial
KEMET's surface mount and single-ended aluminum electrolytic capacitors are available in a variety of configurations including long life, high ripple current and low ESR versions.
Surface Mount
Series | Capacitance | Tolerance | Voltage |
Temperature (°C) |
Life (Max.Dia) |
Description | |
EDH | 1 µF to 2,200 µF | ±20% | 6.3 to 450 VDC | -40 to +105 | 2 Khrs | Low profile vertical chip | |
EDK | 1 µF to 1,500 µF | 4 to 100 VDC | -40 to +85 | Low profile vertical chip | |||
EEV | 4.7 µF to 1,500 µF | 6.3 3to 50 VDC | -55 to +105 | Low profile vertical chip, ultra low impedance | |||
EXV | 1 µF to 1,00 0µF | 6.3 to 50 VDC | 5 Khrs | Low profile vertical chip, ultra low impedance, long life | |||
EDT | 22 µF to 1,000 µF | 10 to 50 VDC | -40 to +125 | 2 Khrs | Low profile vertical chip, ultra low impedance, high operating temperature | ||
A700 | 6.8 µF to 560 µF | 2 to 16 VDC | -55 to +125 | Volumetric efficiency, high operating temperature |
Radial Leads
Series | Capacitance | Tolerance | Voltage |
Temperature (°C) |
Life (Max. Dia.) | Description | |
ESK | 1 µF to 22,000 µF | ±20% | 6.3 to 500 VDC | -40 to +85 | 2 Khrs | General Purpose | |
ESE | 1 µF to 15,000 µF | 6.3 to 450 VDC | -40 to +105 | 1 Khrs | |||
ESS | 1 µF to 470 µF | 4 to 63 VDC | High CV product | ||||
ESH | 1 µF to 22,000 µF | 6.3 to 500 VDC | 2 Khrs | Low ESR, high frequency | |||
ESC | 4.7 µF to 15,000 µF | 6.3 to 100 VDC | 3 Khrs | Low impedance, high ripple current | |||
ESY | 5.6 µF to 6,800 µF | 5 Khrs | |||||
ESX | 4.7 µF to 15,00 µF | High ripple current, long life | |||||
ETG | 12 µF to 2,200 µF | 16 to 450 VDC | |||||
ESG | 3.3 µF to 330 µF | 160 to 500 VDC | |||||
ESW | 2.2 µF to 15,000 µF | 6.3 to 100 VDC | 6 Khrs | ||||
ETA | 33 µF to 8,200 µF | 6.3 to 35 VDC | 10 Khrs | Low impedance, long life | |||
EST | 2.2 µF to 15,000 µF | 6.3 to 100 VDC | |||||
ESZ | 3.3 µF to 330 µF | 160 to 450 VDC | Long life, high reliability | ||||
ESL | 0.47 µF to 6,800 µF | 16 to 450 VDC | |||||
ESU | 6.3 µF to 330 µF | 160 to 450 VDC | -25 to +105 | 12 Khrs | |||
EAK | 1 µF to 4,700 µF | 10 to 450 VDC | -40 to +125 | 5 Khrs | High operating temperature, long life |
Motor Start
KEMET's Motor Start Capacitors are housed in a round molded case meeting creepage and clearance distances according to IEC 60335-1 and flammability ratings according to UL94-V1. They feature double 6.3 mm quick connect terminals.
Series | Capacitance | Tolerance | Voltage | Temperature | Description | |
MS/MD |
25 µF to 750 µF (approved) |
±10% or -0 +25% |
MS:120, 220 260 VAC
MD:120/150, 220/280 and 260/300 VAC (Surge voltage is 1.25 x rated voltage) |
MS: -20 ºC to +60 ºC MD: -20 ºC to |
Developed for AC operation to start the motor by providing a leading current to the auxiliary winding. Designed for intermittent duty only and capable of withstanding the AC voltage applied during starting. MS is rated at a single voltage, while MD is rated with dual voltages. MD is VDE approved to EN 60252-2 for the defined ratings. |