u-blox F10 GNSS Evaluation Kit f. NEO-F10N modules
Manufacturer Item No.:
Item number:
179,00 € / 1 pieces
In Stock.
plus Shipping and VAT
Usually ships in 1 to 3 days
Add to Favorites

L1/L5 dual-band performance for meter-level accuracy in urban environments

  • Easy-to-use kit including antenna, u-center 2 software, and cabling for evaluation of all features of the u-blox NEO-F10N dual-band GNSS module
  • Rugged housing with pin-header for full access to all I/O ports of the NEO-F10N module
  • On-board power consumption sensors
  • Upgradeable firmware

The EVK-F10N evaluation kit is perfect for evaluating the performance of u-blox F10 L1/L5 dual-band GNSS technology in an easy way. It comes in a rugged metal housing with a compact size of 105 x 64 x 26 mm.
The 14-pin front connector gives access to all module interface pins and on-board power consumption sensors. An application board can connect to the embedded u-blox NEO-F10N module easily through the UART interface.
Included in the kit is ANN-MB5, a compact L1/L5 dualband antenna that supports all major GNSS constellations, including NavIC.

EVK-F10N works with u-center 2 software for configuration, evaluation, and debugging of u-blox GNSS products and services. u-center 2 provides useful assistance during all phases of a system integration project.
The EVK-F10N is powered through the USB interface. You can connect a PC running u-center 2 to the kit via the USB or RS232 interface. The on-board power consumption sensor allows measurements over time by means of the included u-center 2 GNSS evaluation software.
  • Compact 105 x 64 x 26 mm EVK-F10N unit in metal housing
  • Type C USB cable
  • ANN-MB5 active GNSS L1/L5 band antenna with 3 m cable
Chip:u-blox F10
Form factor:Evaluation Kit
Dimensions:105 x 64 x 26 mm
GNSS Oscillator:TCXO
Temperature:-40 to +85 °C