New stunning visual Display solutions

2.08" COG OLED WEO025664A with ZIF FPC Version

WEO025664A-ZIF is a graphic OLED display COG (chip on glass) type which is made of 256x64 pixels, diagonal size 2.08 inch. WEO025664A is built in with SSD1362 driver IC; it can communicate via 6800/8080 8-bit parallel, I2C, 3-Wire and 4-Wire SPI interface; it supports 4 bits grayscale image. The supply voltage for logic of WEO025664A is 3V supply, 1/64 duty cycle, display with 50% check board current is 15mA@ 12Vcc (typical value). This OLED module can be operating at temperatures from -40℃ to +80℃; its storage temperatures range from -40℃ to +85℃.

WEO025664A-ZIF is a COG structure OLED module which is ultra thin 1.61 mm; lightweight and low power consumption. It is suitable for smart home application, meter device, personal care appliance, health device, etc.

 

2.08" COG OLED WEO025664A with Hotbar Version

WEO025664A-Hotbar soldering version is a graphic COG OLED display which is made of 256x64 pixels, diagonal size 2.08 inch. WEO025664A Hotbar version is built in with SSD1362 driver IC; it can communicate via 6800/8080 8-bit parallel, I2C, 3-Wire and 4-Wire SPI interface; it supports 4 bits grayscale image. The supply voltage for logic of WEO025664A is 3V supply, 1/64 duty cycle, display with 50% check board current is 15mA@ 12Vcc (typical value). This OLED module can be operating at temperatures from -40℃ to +80℃; its storage temperatures range from -40℃ to +85℃.

WEO025664A-Hotbar version is directly solder flex tail for super-thin profile. This COG structure OLED module is ultra thin 1.61 mm; lightweight and low power consumption. It is suitable for smart home application, meter device, personal care appliance, health device, etc. Winstar provides ZIF FPC and Hotbar versions for customers to choose the suitable module for your application.

 

2.08" COG OLED WEA025664A with PCB Board

WEA025664A is a graphic COG with PCB OLED display model, which is made of 256x64 pixels, diagonal size 2.08 inch. WEA025664A is built in with SSD1362 driver IC; it supports 4-Wire SPI interface, 4 bits grayscale image, 1/64 duty cycle. WEA025664A model is having PCB outline size 70.0 x 22.0 mm with mounting holes on board and 7x1 metal pins on module.

WEA025664A is supported by 3V ~5V, within DC-DC conversion circuit, display with 50% check board current is 90mA@3Vdd (typical value), 1/64 duty cycle. This OLED module can be operating at temperatures from -40℃ to +80℃; its storage temperatures range from -40℃ to +85℃.

 

Technical data

  WEO025664A ZIF FPC WEO025664A Hotbar WEA025664A PCB
Dot Matrix 256 x 64 Dots 256 x 64 Dots 256 x 64 Dots
Module Dimension 60.5 x 19.0 x 1.61 mm 60.5 x 19.0 x 1.61 mm 70.0 x 22.0 x 1.71 mm
Active Area 51.18 x 12.78 mm 51.18 x 12.78 mm 51.18 x 12.78 mm
Pixel Size 0.18 x 0.18 mm 0.18 x 0.18 mm 0.18 x 0.18 mm
Pixel Pitch 0.2 x 0.2 mm 0.2 x 0.2 mm 0.2 x 0.2 mm
Display Mode Passive Matrix Passive Matrix Passive Matrix
Display Color White/Yellow White/Yellow White/Yellow
Drive Duty 1/64 Duty 1/64 Duty 1/64 Duty
Gray Scale 4 Bits 4 Bits 4 Bits
IC SSD1362 SSD1362 SSD1362
Interface 3-Wire and 4-Wire SPI, I²C, 6800, 8080 3-Wire and 4-Wire SPI, I²C, 6800, 8080 SDI
Size 2.08 inch 2.08 inch 2.08 inch